Coleman Military

Coleman Military - NOS steel evaporator screen for Model 530 furnace. Also works on other military evaporators such as M1950, 523 and 520. To install, roll between fingers to reduce diameter slightly and insert into generator/vaporizer. Two burners were installed each to complete the stove above.

The top picture here is of one of the two 347 burners and the bottom picture shows just the generator for this alcohol fuel. The fuel number and required fuel are stamped on the bottom plate of the generator.

Coleman Military

Source: auctions.c.yimg.jp

These images are from roll 348 in the John Morris Collection. In the military surplus business, we have been the United States' most trusted source of genuine military surplus for over 30 years. Coleman's now offers an extensive and growing line of European military accessories and is your best source for even more beautiful and unique accessories.

Coleman’s Military Surplus

Extreme cold gear, camping gear, survival gear, ammo boxes, boots, uniforms, plus fast shipping and friendly customer service, we've got it! Coleman of Wichita started the popular 425 series in 1948. These Model 425 furnaces in the John Stendhal collection are undated.

Starting with the 425 model above, Coleman used a parallelogram decal on the top covers of their range models (pictured above). This first model 425 has a brown colored tank and external braces to secure the legs when extended.

Apparently, Coleman changed the tank finish to a bronze finish shortly after the tank version (pictured below) was introduced. This Model 395 hot plate is undated, but was made by The Coleman Co. produced after WWII as Model 391A above.

Joe Pagan restored this 3-burner stove that he has in his collection. The main fuel is on the left; Each burner has its own control button on the right side. Model 413C has been manufactured by Coleman since 1947.

Improve Search On Items And Nato Spouts For Fuel Cans

This John Stendhal collection plate is an early version with Solodur lacquered brown ware, a brass pattern plate on the front of the case and without the Coleman parallelogram decal on the inside of the lid, which was added a year later - see below.

Source: www.raf.mod.uk

The flat bar on the lid was designed by Coleman to make the lid a flat work surface. It was not until 1949 that Coleman announced that a flat bar could be turned and used as a towel (Stendhal).

Coleman Military Surplus always has military surplus for sale at great prices, but you can find even deeper discounts in this section! Check this section anytime to find our best sales and clearance items here. Sign up for Coleman Specials to be the first to know about special offers and other Coleman promotions.

Coleman built two versions of this marine/trailer rig in the early 1950s: the Model 345 for kerosene and the Model 348 for alcohol. This date model 348 is in the Carl Tucker collection. The left burn was placed on the photo column.

Best Selling Army Surplus Products

Note that the cabinet walls are higher than the bars to keep heating items above the stoves. The Coleman 413D first appears in the 1950 Jobbers catalog and was replaced by the "E" version around 1954.

Model 413C is shown at the top of this page and Model 413E can be found here. This stove is in the John Stendhal collection. Coleman of Wichita manufactured this Model 415C oven in 1940-43 (Joe Pagan).

This stove is in the John Stendhal collection. The tank is salty. The left needle is controlled by a slide switch; The fuel is cast iron and greatly increases the weight of the furnace. These burners will work on a 530 plate, but you will need to use an M1950 generator and then swap the M1950 generator tube rod for your 530 rod.

The lower loop of the generator is the same length. I tried this and it works. Might be a good option if you're desperate for a new 530 fuel bowl. This Model 521 military heater has a 5000 BTU rating and is dated '45 A.

Source: hosting.photobucket.com

The steel pot rests on top of the burner when not in use; it was borrowed from oven '43 for this image. Additional parts of the generator (pictured below) can be cleaned for reuse. The James Cowan Collection stove came with supports to hold a larger pot on the stove.

This Coleman Model 528 stove was a military model M-1942. This was built for the US Army in 1945 (middle picture). The light guide decal (pictured below) is in unusually good condition. This lightweight model was developed by Aladdin and was first produced by them for combat purposes in 1943.

This steamer with aluminum pan/bowls and casing (pictured above) is part of the Carlton Blanks collection. Coleman made these two Model 520 ovens for the military during World War II. The tile (left and pictured right) was one of perhaps only 1,000 made in 1941 and has a copper-nickel tank and brass fittings.

The 520 oven has a steel and copper pan and fittings in the center; it dates from 1942. These coils are in the Dean DeGroff collection. Here you can see the middle of the stove. This Coleman Model 527 stove has a gasoline burner that produces 2,500 BTUs.

A chain switch is also used to operate the stove. Two additional generators are located in the pipe under the tank on the right side. This oven from the John Bell collection includes an owner's manual printed in December 1943.

This is a larger valve pack. It is 5/16" long. The hole diameter is 1/4". It is used in most modern lamps, lamps and plates. This will only work with valve stems that are 1/4 inch wide.

This is a flame "GI pocket stove", Coleman Model 530, dated A 46, which we interpret as January-June 1946. It has a nickel-plated fountain, stainless steel top, and an aluminum pan/carrying case. The fuel box is attached as a military version of the Model 520.

Source: d1ldvf68ux039x.cloudfront.net

The switch serves as a pot handle for both pots; pots make lids for stoves. The fuel in this model and the WWII 520 are also of the "Roarer" type. After World War II, Coleman Speedmaster, Model 500 ranges were painted with bronze green shafts in early 1946.

After that, they were made with nickel-plated copper fountains (top, from 1949 A) ​​and, after the first half of 1951, with green lacquered copper fountains (bottom, 1951 B). The upper oven is in the Lucas Büttner collection.

This is a larger valve pack. It is 5/16" long. The hole diameter is 1/4". It is used in most modern lamps, lamps and plates. This will only work with valve stems that are 1/4 inch wide.

Michael Hawkes obtained this Coleman stove from a retired engineer who told him that two prototype 520 stoves were built in early 1941. Note the adjustable height of the net by raising and lowering the frame posts (pictured above).

The placement of the four legs at the bottom was evaluated before the legs were attached to the metal (bottom picture). The third version of 425 differs from the second (above) in that the legs are provided with internal brackets.

Note the rivets that hold the bracket at the top and bottom where the cable leg enters the housing. This stove is in the John Stendhal collection. This Model 391A appears in catalogs a few years after World War II.

Coleman uses the name The Coleman Company, Inc. (picture below) started in 1945. The cook is 19 3/4″ x 10 5/8″. Coleman announced that the decorations were made of ivory and black enamel. The stove has Band-A-Blu burners and a Solodur rust-resistant pan.

Source: thumbs.worthpoint.com

This stove is in the Tim Tucker Collection. Have ordered from them repeatedly, products are usually cheap, usually have sales/free shipping. The site can be difficult to use and find, sometimes you can't find what you want and then realize they had it later.

I'm a fan of NATO burners... This military four burner unit has the same 10,000 BTU fuel as the 522 above, but is designed to be mounted next to a large cooktop using brackets on either end

. Each 34 5/8″ long fuel and pressure unit is easily removed by loosening the thumb screws on the left side. A combined fuel level/pressure gauge (pictured below) is mounted on the left side of the tank.

This unfired unit is in the Dave Ashley collection. Please take a look at our entire range, our online store is constantly adding new items. In addition to the products listed on this site, with a wide range of government surplus products, if you are looking for a specific military equipment, vehicle or any other part, let us help you.

Send your NSN or part number requests to our parts department. The Coleman 426 3-burner model is also from the late 1940s. Side burners come out of holes on each end of the stove body. This stove is in the collection of Dave McFarlane.

Model 415D appeared in the Jobbers catalog in 1947. Fuel rings are made of stainless steel. Solodur's tank is made of rust and is painted brown. The body of this stove has a forest green stove that is enamelled.

This range from the Dana Kennison collection was cheaper than the 413C above and had a smaller cooking surface. Another military heater, the Model 522, is undated, but was manufactured between 1942 and 1945 and has a 10,000 BTU rating.

Source: www.norwich.edu

The diameter of the source is 8 inches; The unit is 13 inches tall to the top of the legs. Two legs are spare. This fireplace is part of the Kyle Marsh Collection. In 1948-49, Coleman modified its Model 413C from the early 1947 version by replacing the brass plate that identifies the model with one located on the front of the case under the grip.

Although the tank is still painted amber, it is described as steel, not Solodur. Coleman's parallelogram decal appears on a number of these later coilovers. This stove is in the John Stendhal collection. This Coleman Model 413B from the John Stendhal collection was made a few years after World War II.

According to John, it is possible that the postwar 413B coils had a Solodur brown tank, like several other postwar models, and a tank top wire, found only on this model, on the right side of the valve (pictured below).

To see a pre-war version of this fireplace, click here. This Model 524 has four 10,000 BTU burners. This particular heating unit was manufactured in the mid 1940's and early 60's based on the use of the postal area in the address.

Fuel pairs operated from opposite sides This military heater is in the Steve Miller Collection. John Stendhal dates his 426A oven to 1951-53. He describes the corners and edges as tightly rounded. This and the shape of the towel rail are the only differences he found between the 426 and 426A models.

This Model 526 military heater comes in a shipping carton and is dated A (January-March we believe) 1943. This model has a 5000 BTU burner. There are no military marks on the stove or box, and we do not know the origin and purpose of the metal marks in the administration.

This heating unit is in the collection of Michael Hawk. Model 525 has two 10,000 BTU burners. Tip purge valves are located above the fuel control valves on these military heaters. These military heater units are mounted on top of tanks, such as models 521 and 522.

This stove is in the collection of John Rugotzke. The date stamp on this coil is 520 1944 (pictured below, left). Coleman had reduced the number of legs on the model from four (over the coils) to three (this coil) at the start of the war.

A stamp on the container (bottom right image) identifies the container manufacturer as C.M.MFG.CO., possibly Crunden-Martin Mfg. Co., St. Louis, Missouri (Blanks). This stove is in the collection of Michael Lenz.

coleman military lantern, coleman surplus military, coleman military discount, coleman military surplus store online, coleman military surplus store, coleman surplus store, coleman military supply, coleman's military surplus catalog